Cardinal Detecto 6735 Owner's Manual download pdf (Page 17)

OPERATION

Basic Operation

To Weigh

1. Press ON/OFF key to turn indicator on.

2. Press ZERO key to zero weight display. ZERO, GROSS and lb, oz, kg or ST

annunciator will turn on to show that the scale is ready for use.

3. Place patient on scale and read weight display.

4. If a printer is connected to scale, press PRINT/ENTER key to print a ticket.

5. Remove patient from scale.

Zero Weight Display

1. In Gross Weight mode (GROSS annunciator on), press ZERO key.

2. Weight display will return to zero. ZERO and STABLE

annunciators will turn on

to show a stable, center-of-zero gross weight condition.

Metric Conversion

Press UNITS key to toggle between pounds and kilograms. Note that the lb or kg

annunciator will turn on to show the weighing unit selected.

Push Button Tare (Tare weight is NOT known)

1. In Gross Weight mode (GROSS annunciator

on), place item (wheelchair, walker, etc…) to

be tared on scale.

IMPORTANT! Tare entry is not

allowed if Auto Hold is enabled.

2. Press TARE key.

3. Display will show weight of item on scale and TARE annunciator will turn on.

4. Press PRINT/ENTER key.

5. Display will change to

0.0

and NET annunciator will turn on to show that net weight

is being displayed. The item's weight has been entered as "tare weight".

6. Proceed with weighing operation.

Tare Weight Entry (Tare weight is known)

1. In Gross Weight mode (GROSS annunciator on), press TARE key.

2. Display will show zero or previously entered tare and TARE annunciator will turn on.

3. If weight displayed is acceptable, press PRINT/ENTER key to save it. Otherwise,

use the numeric keys and enter a new tare weight. Note that when entering tare

weights, a maximum of 4 digits can be entered and the numbers advance from right

to left in the display. The number of leading or trailing zeros required to obtain your

desired tare is dependent upon the DIVISION VALUE selected in the setup

procedure.

For example: Division Value: 0.2

Desired Tare Value: 1.6 lb

Key Sequence: 1 6

4. After the new tare weight has been entered, press PRINT/ENTER key.

5. Display will show a minus Net weight and NET annunciator will turn on.

6. Proceed with weighing operation.

Tare Weight Recall

1. In Net Weight mode (NET annunciator on), press TARE key.

2. Display will show previously entered tare for approximately 1 second and then return

to Net Weight mode (NET annunciator on).

To Clear the Tare Weight

1. Press NET/GROSS key to return to Gross weight mode.

2. Remove all material from scale platform and press ZERO key. This will reset tare

weight to zero.

8555-M210-O1 Rev R y 758C Owner’s

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments

Cardinal Detecto 6735 Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Kitchen scales Cardinal Detecto 6735